Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Mar Vista
If your dryer is taking two cycles to finish a load, the restriction is usually in the vent, not the appliance. We clean dryer vents in Mar Vista for homeowners and property managers, and we know what post-war construction here tends to hide inside the walls. Our technicians have up to 10 years of experience, and the local pro is licensed and insured as their state requires. Call (855) 658-5111 for a free written estimate. One flat price per system, agreed before any work starts, with before-and-after photos of your own vent run.
Why Mar Vista Homeowners Call Air Duct Cleaning Studio City for Dryer Vent Cleaning
Mar Vista has a lot of 1940s to 1960s bungalows and low-rise apartments, and the dryer vents in those buildings were rarely planned well. We deal with that housing stock constantly, which means we expect the run to be longer and more awkward than the homeowner describes. That local knowledge changes how we inspect.
What people in Mar Vista tell us on the phone is consistent: a dryer that used to finish in one cycle now needs two, the laundry room feels humid, and the exterior cap looks clear. Those three things together usually point to a restriction deeper in the run or a joint that has opened up. We quote from the written estimate, not from a teaser coupon figure, and we don’t price per vent. Our dryer vent cleaning team treats the whole pathway as one system, so you get a flat number before we begin.
We serve Mar Vista alongside the neighborhoods around it, and the questions we hear here match the housing: old flex duct, tape-wrapped joints in wall chases, low termination points that lost a cap years ago. Ask us to walk the run with you before anything is cleaned.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Dryer Vent Cleaning Services in Mar Vista
Every job starts with a look at the actual pathway, not a guess from the laundry room. Here’s what we do in Mar Vista homes.
Dryer Vent Inspection in Mar Vista
Inspection in Mar Vista usually means a camera run through the vent to find where the airflow drops off. Post-war bungalows here often hide a vent behind a closet wall or under a raised foundation, so the true length of the run is rarely what the homeowner estimates. The camera shows us sagging sections, collapsed flex, and separated joints before we clean anything.

Vent Cleaning in Mar Vista
We clear the run mechanically with agitation tools under negative pressure, so the lint mat and crusted debris go into HEPA filtration rather than back into your laundry room. In Mar Vista’s older housing stock, that crust is often dense and damp because the marine layer keeps the crawlspace and closet chases humid. The run gets cleared end to end, then we show you the photos.

Lint Removal in Mar Vista
Lint accumulates in the low points of a sagging run, and in Mar Vista’s retrofit vents those low points are usually inside a crawlspace or a wall chase. A damp lint mat is a fire risk and the reason airflow drops. We remove it fully, then confirm airflow at the exterior cap.

Vent Rerouting in Mar Vista
Some runs in Mar Vista can’t be cleaned to a safe standard because they’ve collapsed or taken too many elbows through a crawlspace. In those cases we reroute the vent on a shorter, straighter path to a proper exterior termination. That’s often the real fix rather than a repeat cleaning every year.
Trusted Brands We Work With in Mar Vista
We use Rotobrush and Nikro equipment for mechanical contact cleaning, the same class of professional-grade systems used in commercial duct work. For post-cleaning treatment we carry Abatement Technologies and Guardsman sanitizing products, and our air quality offering includes Honeywell systems. We don’t claim to stock parts in a warehouse; what we do is inspect, diagnose, and set up the right product for the job. If your dryer vent work turns up a broader air quality concern in a Mar Vista home, we can quote that separately on the written estimate.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Mar Vista Homes
The failures below are the ones we run into most in Mar Vista’s post-war housing, and each one explains a dryer that seems to still work but doesn’t dry.
- Sagging original flex duct behind a closet wall. The run has collected a damp lint mat over decades, and the homeowner assumes it’s a short, clear path to the outside. It usually isn’t. A camera run shows exactly where it sags and how much has built up.
- Duct-tape-wrapped joints that have dried out and split. In many Mar Vista vent chases, the original tape has failed, so lint escapes into the wall cavity while the exterior cap still looks fine. That’s why airflow at the cap isn’t proof the run is clear.
- Missing exterior vent caps and bird guards on low terminations. When the cap falls off a low wall or crawlspace termination, debris and nesting material get into the vent. It reads as a clogged dryer rather than a broken cap, and cleaning alone won’t fix it if the cap isn’t replaced.
- Long, multi-elbow runs hidden under a raised foundation. Some Mar Vista homes terminate under the floor rather than through the roof or sidewall, so the run is far longer than expected. That length plus elbows is exactly where lint settles and stays.
Pricing for Dryer Vent Cleaning in Mar Vista, CA
Here’s what these jobs typically run in Mar Vista, as estimates only. The written estimate sets the final price.
- Dryer vent inspection with camera: $95 – $175
- Standard vent cleaning (short, accessible run): $150 – $260
- Deep lint removal for a long or sagging run: $220 – $380
- Vent rerouting (shorter path to a proper termination): $350 – $750
- Bird guard or vent cap replacement: $75 – $180
What moves the number is run length, how many elbows the vent takes, whether the crawlspace access is tight, and whether we find collapsed flex or a separated joint that has to be reconnected. It isn’t the age of the house by itself. Call for a free written estimate and we’ll give you a flat price for the whole system before we start, with before-and-after photos when the work is done.
We Also Serve Cities Near Mar Vista
Our dryer vent and air system work covers neighborhoods across the Westside and into the city. If you’re just outside Mar Vista, we also serve Culver City, Beverly Hills, Mid-City, and West Hollywood. The same older-housing challenges apply in each, and the same flat-price written estimate applies too. Call and we’ll confirm your address and the scope.
Serving Mar Vista, CA – Our Local Coverage Area
We serve Mar Vista and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Mar Vista
Two cycles usually means the restriction is in the vent run, not the lint trap. In Mar Vista’s older homes, the vent often runs long with several elbows through a crawlspace or closet chase, and lint settles in the low points and turns damp. That reduces airflow enough that a dryer can’t finish a load in one cycle. We inspect the run with a camera, clear it under negative pressure, and show you the photos. Call (855) 658-5111 for a free estimate.
Often they can be cleaned, but a collapsed or badly routed run in a 1950s Mar Vista home is sometimes better rerouted. If the original flex has crushed or taken too many turns through a crawlspace, cleaning brings airflow back only partially and the buildup returns. A camera inspection tells us which path is right. A standard clean runs roughly $150 – $260; rerouting runs roughly $350 – $750. Call for an exact figure after inspection.
Old fiberglass-lined flex duct that has sagged, and joints wrapped in duct tape that has dried and separated. In many of these homes, dryer vents were retrofit into closets or interior rooms, so the run snakes under the floor or through a wall chase rather than straight out. We find damp lint mats at the low points and, occasionally, lint that has escaped through a failed joint into the wall cavity while the exterior cap looked fine. Call and we’ll walk you through what we find before any work begins.
Yes. The marine layer and onshore breeze push humid, salty air into Mar Vista’s older duct networks, which keeps the inside of metal and flex vents damp and encourages mold and musty odors. That moisture turns lint from a light dust into a crusted mat that clogs the run faster than in a drier climate. It also accelerates corrosion in older galvanized runs. The right fix is a proper cleaning and a check of the joint integrity in the same visit. Call (855) 658-5111 for a free written estimate.
Look at where the vent exits the house. If there’s no cap or bird guard over the termination, you’ll likely see an open hole or a flap that no longer sits flush. On low terminations like those common under raised foundations in Mar Vista, that opening is easy for birds and debris to reach. If it’s missing, we can replace it during the same visit as the cleaning. Call and we’ll confirm what you need.
If your dryer is struggling or you haven’t had the vent looked at in years, it’s worth checking. Call (855) 658-5111 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per system, agreed before work starts, and before-and-after photos of your own vent run after we clean.
Written by the team at Air Duct Cleaning Studio City.