Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Mount Washington
If your Mount Washington home is losing air through disconnected joints or you’ve pulled ash out of a return grille all summer, you’re in the right place. We handle duct repair & sealing for hillside homes across Mount Washington, from narrow canyon streets to the slopes above San Rafael Avenue. Our technicians have up to 10 years of experience and work with professional-grade Rotobrush equipment, not shop vacuums. Because the neighborhood’s tight lots and steep driveways make access half the job, we plan the route before anyone touches a ladder.
Call (855) 658-5111. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Every job is one flat price agreed before work starts, and you get before-and-after photos of your own ductwork.
Why Mount Washington Homeowners Call Air Duct Cleaning Studio City for Duct Repair & Sealing
Hillside work here is its own skill set. A technician who’s used to east-side tract homes may not know what to make of a raised-floor system with three separate additions feeding one return, and that’s the normal situation in Mount Washington. When we serve Mount Washington, we arrive already expecting short, irregular runs, mixed rigid metal and older flex duct, and an attic or under-deck route no one has touched since before the last remodel.
That local familiarity is why people call us back. We open with diagnosis, not a sales script: camera inspection, agitation under negative pressure with HEPA filtration, and a straightforward explanation of what’s actually broken before a single joint is resealed. Our technicians have up to 10 years of experience reading exactly these houses.
The service hub covers the full scope – cleaning, dryer vent work, HVAC components, repair and air quality – so you’re not juggling three contractors with three opinions.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Mount Washington
Flex Duct Repair in Mount Washington
Flex duct is the weak link in most Mount Washington homes, especially runs that were retrofitted piecemeal into a raised-floor or attic system over several, separate renovation cycles. We find the crushed, disconnected or torn sections and replace them rather than taping over damage. In cramped under-deck and attic spaces, the repair itself is often the easy half; getting tools and legs into position is the rest.

Mastic Sealant for Older Metal Runs
The original metal duct in a 1940s or 1950s Mount Washington house has usually lost whatever seal it had. Old duct tape dries out, mastic chalks and cracks, and joints that once fit tight now leak at the seams. We reseal those joints with mastic that holds up in a warm, dry canyon climate, which is a real difference from a thin tape-and-go patch.

Metal Duct Repair for Hillside Systems
Sloped foundations and pier-and-beam construction mean the metal trunks in some Mount Washington homes have shifted with the house over decades. That opens seams and separates connections at the branches. We inspect the full run, not just the visible trunk, and correct the joints before sealing so the repair actually holds.

Air Leak Repair and Duct Insulation
Leaks at attic and under-deck connections pull in whatever’s in the surrounding space – and in Mount Washington, that includes brush-fire ash during Santa Ana wind events. We seal those leaks at the source and can add duct insulation where runs pass through unconditioned attic space so your system stops losing conditioned air before it reaches a room.
What Actually Happens During a Mount Washington Duct Repair
Here’s how a typical job goes in this neighborhood, because it’s different from a flat-lot house. Access is usually the first hurdle: crews haul portable equipment up exterior stairs, through side-yard gates, and around hillside decks, because most lots here are too tight for a truck to reach the door. The duct runs themselves are frequently a patchwork of rigid metal and older flex duct, fitted piecemeal over decades rather than laid out in a single build.
A routine cleaning often turns up the real problem. In many Mount Washington homes, we find disconnected or crushed flex runs in tight attic or under-deck spaces, frequently after Santa Ana winds or a nearby brush fire have pulled fine ash into the return ducts. A qualified technician uses camera inspection and agitation tools under negative pressure with HEPA filtration to assess the damage, then repairs and seals the compromised runs with mastic sealant or by replacing flex duct sections, making sure supply and return ducts are properly connected and sealed. The result is real system efficiency and cleaner indoor air, not just a nicer-looking duct.
Trusted Brands We Service in Mount Washington
We clean and service systems built on the equipment Mount Washington homes already have, and we don’t claim to stock parts we don’t carry. Our mechanical cleaning uses Rotobrush systems trusted in commercial and industrial work. For post-repair air quality, we install and service Honeywell and Aprilaire equipment, including filtration and air quality hardware. And when a job needs sanitizing after mechanical cleaning, we apply Abatement Technologies and Guardsman products to address microbial and odor concerns. That’s your full air pathway handled by one provider, not three.
Common Duct Repair & Sealing Problems We See in Mount Washington Homes
- Disconnected or crushed flex duct in cramped attic spaces. Poor original installation or pest intrusion leaves flex runs pinched or fully separated, which cuts airflow to those rooms and pulls attic air into the supply. We find the break by camera and replace the damaged section.
- Deteriorated mastic and tape seals on older metal joints. Hillside homes with irregular, irregularly routed duct layouts leak heavily at these old joints, and that’s quiet energy loss every month. Resealing the seams with mastic is often the single biggest fix.
- Ash and smoke intrusion during fire season. Loose connections let fine ash and wildfire smoke work into the ducts and settle in the returns. Cleaning alone won’t hold if the loose joints stay loose, so cleaning and sealing go together here.
- Piecemeal retrofits that never joined up. In a house built between the 1920s and 1960s, each addition may have its own improvised duct run. We map the whole system so we’re not sealing one leak while another sits open.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Mount Washington, CA
These are typical estimates for the Mount Washington market, and the written estimate sets your final price. Flex duct repair or a single section replacement generally runs $185 to $475 depending on access. Resealing metal joints with mastic across a whole system lands in the $350 to $850 range. Air leak repair combined with reconnecting disconnected runs typically runs $400 to $1,200. Adding duct insulation to unconditioned attic runs usually adds $300 to $700. Access is the biggest cost driver here: a run behind a hillside deck or squeezed into a low attic takes longer than the same repair on a flat lot. Estimates are free, and we give one flat price per job before any work starts.
We Also Serve Cities Near Mount Washington
We work with homeowners across the surrounding area too, including Glassell Park, Atwater Village, Koreatown and Mid-City. The same canyon-and-tract-housing mix shows up in pockets all around, so the approach carries over. If you’re just outside Mount Washington and not sure we reach you, call and we’ll tell you straight.
Serving Mount Washington, CA – Our Local Coverage Area
We serve Mount Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Mount Washington
If the ducts are original 1940s metal with the old joints, they almost certainly need sealing. Look for rooms that heat or cool unevenly, dust collecting at registers, and visible gaps or dried tape at seams. A camera inspection confirms it, and resealing with mastic typically runs $350 to $850 here. Call (855) 658-5111 for a free estimate.
Cleaning alone often isn’t enough. Fine ash gets pulled through loose connections during fire season, and if those joints stay loose the ash returns with the next wind event. We clean the ductwork under negative pressure with HEPA filtration, then find and seal the compromised connections so the source is closed, not just swept. Call (855) 658-5111 to book an assessment.
Flex duct repair means replacing crushed, torn or disconnected flexible sections, while metal duct repair means resealing and correcting rigid trunk and branch joints that have shifted or opened. Most Mount Washington hillside homes need both, because the systems are a mix of old flex and original metal. We diagnose which runs need which before quoting. Call (855) 658-5111 for an exact quote.
Yes, sealing is usually the real fix for lingering smoke smell. Smoke rides in through loose joints and settling grilles, and once the leaks are sealed with mastic and air leak repair is done, that path closes. We pair it with a proper cleaning so any ash already inside comes out. Call (855) 658-5111 for a free estimate.
Access is often the main challenge. Steep, narrow canyon streets and hillside lots mean equipment comes up exterior stairs and through side-yard gates, and duct runs in tight attics or under-deck spaces can be hard to reach. We plan routes and access before the job so nothing gets missed. Call (855) 658-5111 and tell us about your layout.
Ready to Fix the Leaks in Your Ductwork?
If your Mount Washington home has uneven airflow, dusty registers or a smoke smell that won’t clear, it’s usually a duct problem, not an AC problem. Call (855) 658-5111 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per job agreed before work starts, before-and-after photos of your own ducts, and a trained professional you can talk to like a neighbor.
Written by the team at Air Duct Cleaning Studio City.