Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Mar Vista
Mar Vista sits close enough to the coast that the marine layer moves through the neighborhood almost every morning, and that salty, damp air is hard on older ductwork. If your registers smell musty, if one room never gets enough air, or if you can hear a faint hiss behind the drywall, the ducts are probably leaking or the flex runs have given up. We connect Mar Vista homeowners with independent local pros who do the diagnosis and the repair, using Rotobrush and Nikro equipment for the mechanical work and mastic and mechanical fasteners for the seal. Call (855) 658-5111. We answer 24/7. Fast dispatch, 7am-7pm.
Why Mar Vista Homeowners Call Air Duct Cleaning Studio City for Duct Repair & Sealing
We work across Mar Vista and know what shows up in its housing stock: post-war bungalows and low-rise apartments from the 1940s through the 1960s, many with galvanized or early flex duct that has never been opened up. When a job calls for repair and sealing, our licensed and insured local pros treat it as a standalone service, not an upsell tacked onto a cleaning.
You get one flat price per system, agreed before work starts. Our technicians have up to 10 years of experience and show before-and-after photos of your own ducts, so you can see collapsed runs and failed tape instead of taking our word for it. The local pro is licensed and insured as their state requires. If something about the work isn’t right, our satisfaction guarantee covers it.
Dispatch to Mar Vista moves quickly off the 10 and the 405 corridors, so a call in the morning usually means an inspection the same day. We answer 24/7 for scheduling. We’re closed Saturday, and fast dispatch runs 7am to 7pm, Sunday through Friday. Pricing is set per job by the written estimate, and the estimate is free.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Mar Vista
Coastal moisture changes what these jobs look like. Here’s what our duct repair & sealing team covers in Mar Vista and where each piece fits.
Duct Sealing with Mastic Sealant
Old cloth-backed duct tape is the first thing to go. In Mar Vista’s humidity it loses adhesion, curls at the edges, and lets salty attic air pull straight into the supply and return. We brush the joints clean and seal them with mastic and mechanical fasteners, which hold up far better in a damp coastal environment than tape ever will.

Flex Duct Repair
Original fiberglass-lined flex duct is common in Mar Vista’s mid-century homes, and after decades of marine-layer dampness a lot of it has collapsed or gone moldy inside. Collapsed runs choke airflow and push musty air out of the registers. We locate them by camera inspection, remove the contaminated sections, and replace them so the run holds its shape and delivers air the way it was designed to.

Metal Duct Repair
Salt air corrodes galvanized duct at the seams, and those pinhole leaks quietly steal pressure from the whole system. We find them, patch them properly, and re-seal the seams with mastic so the duct can hold negative pressure during cleaning and filtration. If a run is too far gone, we’ll tell you straight and quote the replacement.

Duct Insulation
Where flex or metal duct runs through a hot attic or an uninsulated crawl, insulation keeps the cool air cool and cuts condensation inside the duct. That condensation is one of the reasons mold shows up in Mar Vista duct systems in the first place. We check insulation condition alongside every repair and seal job.
Trusted Brands We Service in Mar Vista
We work with the equipment and products professional contractors rely on. Rotobrush and Nikro drive the mechanical contact cleaning. Abatement Technologies and Guardsman sanitizing agents handle microbial and odor treatment after the source is physically removed. Honeywell and Aprilaire systems are part of our air quality and filtration offerings for homeowners who want to address air quality after the repair is done. We don’t stock parts for these lines, so lead times on product depend on the manufacturer, but sourcing and scheduling move quickly. If your system already runs one of these brands, our local pros know it.
See the difference
Before
After
Before
After
Before
AfterCommon Duct Repair & Sealing Problems We See in Mar Vista Homes
- Disintegrating duct tape on joints. Old tape on supply and return joints fails fast in coastal humidity, opening leaks that pull salty, moist attic air straight into the system. Mastic and fasteners are the fix, not another layer of tape.
- Collapsed or moldy fiberglass flex duct. Decades of marine-layer dampness leave some flex runs flattened or growing mold, which restricts airflow and pushes a musty smell out of the registers. Camera inspection is how we find the bad sections.
- Corroded metal seams. Galvanized duct rusts at the seams where salt air settles, and those pinholes undermine pressure during cleaning and filtration. Sealing them restores the system’s ability to hold pressure.
- Failed insulation on attic runs. Damp, sagging insulation lets ducts sweat and lose efficiency, which feeds condensation inside the duct. Checking it belongs in every repair.
Pricing for Duct Repair & Sealing in Mar Vista, CA
Pricing is set per job by a written estimate, and the estimate is free. A typical duct sealing job with mastic in Mar Vista runs $450 – $1,100 for a standard single-family home, depending on how many joints and runs need work. Flex duct replacement for collapsed or moldy sections typically runs $350 – $900 per run. Metal duct repair and seam sealing generally lands around $250 – $650, and adding duct insulation to attic or crawl runs usually runs $400 – $1,000. What moves the number is access, the number of runs involved, and whether corroded metal needs replacing rather than sealing. We give one flat price per system, agreed before work starts, and show before-and-after photos so you know what you paid for. Call (855) 658-5111 for an exact quote.
We Also Serve Cities Near Mar Vista
The same repair and sealing work goes out to Culver City, Beverly Hills, Mid-City, and West Hollywood. Same process, same equipment, same flat price agreed before work begins. If you’re just over the line from Mar Vista and need a duct assessment, call and we’ll book you into the next opening. Sunday through Friday, 7am to 7pm.
Serving Mar Vista, CA – Our Local Coverage Area
We serve Mar Vista and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Mar Vista
Mar Vista’s marine layer pushes salty, humid air into ductwork daily, so old duct tape fails faster here than in drier inland neighborhoods like the Valley. The moisture makes mastic sealant and mechanical fastening essential rather than optional. Call (855) 658-5111 for an exact quote on sealing your system.
A genuine job starts with a camera inspection to find collapsed runs, then removes contaminated flex sections, seals metal joints with mastic and mechanical fasteners, and verifies airflow at the registers and the air handler. Anything short of that is not a repair. Call (855) 658-5111 for an estimate.
No. A fogging sanitizer coats surfaces but doesn’t remove mold or contaminated material, so the source stays in the duct and the smell comes back. Real treatment is physical: remove the contaminated flex, clean the metal, then treat. Call (855) 658-5111 to schedule an inspection.
Weak airflow at registers, uneven room temperatures, and a musty smell are the usual signs. A camera inspection confirms it. If you’ve noticed those symptoms, call (855) 658-5111 for a free estimate.
Most coastal Mar Vista homes do well in the MERV 8 to MERV 13 range after sealing, since a sealed duct can handle a higher-efficiency filter without starving the system. Go too high and you’ll restrict airflow unless the system was designed for it. Call (855) 658-5111 and we’ll check what your system can handle.
One more thing worth saying plainly, because it’s the reason we lead with process: Mar Vista’s marine layer pushes salty, humid air into original galvanized and early flex ductwork every day, so duct joints wrapped in deteriorating tape fail faster here than in drier inland LA neighborhoods. That makes mastic sealant and proper mechanical fastening a requirement, not an upgrade. We won’t sell you a fogging treatment in place of a real repair, and we won’t tell you a cleaning fixes mold that’s growing inside collapsed flex duct. Clean it, seal it, treat it. That’s the sequence, and it’s the only one that holds up in a coastal house.
Call (855) 658-5111 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Written by the team at Air Duct Cleaning Studio City.