Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Sherman Oaks
If your Sherman Oaks home is losing airflow, running dusty, or carrying a smell you can’t place, the ducts are usually where the answer lives. We repair and seal ductwork across Sherman Oaks, from the older ranch tracts south of Ventura Blvd to the hillside streets off Mulholland and Coldwater Canyon. Our technicians have up to 10 years of experience and work with camera inspection, mastic sealant, and metal repair methods built for the ductwork actually installed here. Call (855) 658-5111 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Duct repair and sealing in Sherman Oaks is often the real fix after a cleaning reveals disconnected, crushed, or leaking runs.
- Original 1950s-60s sheet-metal ducts in this part of the Valley develop seam separation and rust-through that send attic air into your supply stream.
- Sepulveda Basin dust and seasonal hillside fire ash fuse to old duct walls and need agitation tools and source removal, not a simple vacuum pass.
- The written estimate sets the final price. The estimate itself is free.
Why Sherman Oaks Homeowners Call Air Duct Cleaning Studio City for Duct Repair & Sealing
Sherman Oaks homes carry a particular kind of duct history. The 1940s-1960s ranch and traditional houses south of Ventura Blvd were built with rigid sheet-metal runs that have now been through decades of heat cycles, remodels, and upgrades. Many of them are still working. Many are leaking at the seams. When we open a system here, we often find the original duct trunking with newer flex runs spliced onto it, and the splice is where the loss begins.
That’s the work we do. Duct repair and sealing is a standalone service for us, not an upsell tacked onto a cleaning. We use professional-grade Rotobrush and Nikro equipment for the mechanical side, Abatement Technologies and Guardsman products for treatment when it’s called for, and mastic or metal tape for the actual seal. Every job gets before-and-after photos of the ductwork we touched, so you can see what was found and what was corrected.
Sherman Oaks is a dense pocket of single-story homes and 1960s-70s apartment buildings along Ventura Blvd and the Ventura Canyon and Chandler corridors. We serve it as part of our Sherman Oaks coverage, and the local housing stock shapes how we approach every job. Same-day service is often available. Call and we’ll line up a time.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Sherman Oaks
Duct Sealing
Duct sealing is frequently the fix that makes everything else worth doing. In Sherman Oaks ranch homes, a sealing job often means tracking down leaks at the plenum, at the boot connections behind registers, and at seams in the original sheet-metal trunk. Once the leaks are located with camera inspection, we seal them with mastic or metal tape so the system holds pressure and delivers air where it’s supposed to. A sealed system runs quieter, holds temperature better, and stops pulling attic dust into the supply.

Flex Duct Repair
Flex duct gets crushed, kinked, and disconnected more often than homeowners expect. Post-remodel splices where new flex was attached to old rigid runs are the most common culprits in Sherman Oaks, and a disconnected run in an attic is essentially a hole in your HVAC system. We locate the breach with camera inspection, replace or reconnect the failed section, support it properly, and seal the joint. That restores supply and return balance across the system.

Metal Duct Repair
Original sheet-metal ductwork in Sherman Oaks homes from the 1950s and 1960s develops seam separation, rust-through, and loose joints over time. Repairing it isn’t a matter of patching a hole. It means cleaning the surface, treating corroded areas, and sealing the seam so attic air and insulation fibers stop moving into the supply stream. We handle metal repairs with mastic sealant and where needed metal tape, then verify the seal with a flow check.

Duct Insulation
Older Sherman Oaks homes often have duct runs in attics that get brutally hot during summer. Insulation on those runs may be compressed, torn, or missing entirely. We replace compromised duct insulation so the conditioned air reaching your rooms is still the temperature it started at. This pairs naturally with sealing work: seal first, then insulate, or you’re wrapping a leaking pipe.
Trusted Brands We Service in Sherman Oaks
Our work touches the equipment your system relies on. We use Rotobrush and Nikro mechanical cleaning systems, apply Abatement Technologies and Guardsman sanitizing products when treatment is warranted, and install and service Honeywell and Aprilaire air quality systems for homeowners who want filtration or humidity control after the repair is done. That means one call handles the full air pathway rather than three contractors. Ask about Honeywell- and Aprilaire-compatible upgrades when you book.
Common Duct Repair & Sealing Problems We See in Sherman Oaks Homes
- Original 1950s-60s sheet-metal with seam separation and rust-through. These ducts let attic air and insulation fibers into the supply stream, and they show up most often in the ranch homes south of Ventura Blvd.
- Post-remodel splices of new flex onto old rigid runs. These disconnected or crushed sections dump conditioned air into the attic instead of your rooms, and camera inspection is the only reliable way to find them.
- Seasonal ash intrusion bonded to duct walls. Ash from hillside fires above the Valley fuses to old sheet-metal; without agitation tools and source removal, standard cleaning leaves residue that re-enters the airstream.
- Sepulveda Basin dust loading the return. Fine windblown dust moves through this pocket of the Valley and builds up in returns more heavily than in coastal LA homes.
Why Sherman Oaks Ductwork Needs More Than a Vacuum Pass
Sherman Oaks sits in a Valley pocket where the marine layer gets trapped against the Santa Monica Mountains and the Sepulveda Basin. What that means for your ducts: a steady accumulation of fine windblown basin dust, plus hillside fire ash that recurs every fall. Those two materials behave differently in a duct. Dust loads the return and compacts over time. Ash bakes onto old sheet-metal and fuses to the seams. A standard vacuum pass moves the loose dust and leaves the fused ash where it is.
That’s why cleaning here often uncovers a repair need rather than closing one. Removing fused debris from an old metal duct calls for agitation tools and source removal. And once the duct is actually clean, the leaks underneath become obvious. In many Sherman Oaks homes, the answer is clean it, seal it, then insulate the runs that lost their insulation years ago. That’s how a system starts behaving again.
In the hillside streets off Mulholland and Coldwater Canyon, technicians regularly find ash and ember debris drawn into return ducts from brush fires on the ridgelines above the Valley. Those jobs need HEPA filtration and negative pressure containment during repair, so contaminated air doesn’t spread into living space. In the older ranch tracts near Dickens and Kester, a routine cleaning frequently turns into finding disconnected flex runs a prior remodel left dumping conditioned air into the attic. A qualified technician finds the breach with camera inspection, performs source removal, and seals the joint with mastic or metal tape to restore supply and return balance.
This is the local pattern. In many Sherman Oaks ranch homes south of Ventura Blvd, the ducts haven’t been touched since they were installed. The sheet-metal has cycled through dozens of summers above 100°F, and the system has been pulling harder every year. Sealing isn’t a luxury here. It’s what makes the rest of the system work.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Sherman Oaks, CA
Typical Sherman Oaks duct sealing runs $600-$1,500 for a whole-house system, depending on run count and how much original sheet-metal needs attention. Flex duct repair in this market usually falls in the $250-$600 range per failed run, and metal duct repair runs $350-$900 depending on corrosion extent and access. Duct insulation replacement for attic runs typically runs $400-$1,200 for a standard ranch home. What moves the number: how many runs need work, attic access and clearance, whether ash-fused debris needs aggressive source removal, and whether the system is the original rigid duct or has been partially replaced. The written estimate sets the final price. The estimate itself is free. Call (855) 658-5111 to book one.
We Also Serve Cities Near Sherman Oaks
Our coverage extends across the east Valley and into the adjacent neighborhoods. We work in Valley Village, Studio City, North Hollywood, and Toluca Lake on the same duct repair and sealing scope we bring to Sherman Oaks. If your system reveals a problem during a cleaning, our duct repair & sealing team can often handle it in the same visit. Call (855) 658-5111 to confirm coverage for your address.
Serving Sherman Oaks, CA – Our Local Coverage Area
We serve Sherman Oaks and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Sherman Oaks
Ash from hillside brush fires fuses to the interior walls of older sheet-metal ducts in Sherman Oaks more heavily than in most Valley areas, and that changes the repair scope. Standard vacuuming leaves the fused layer behind, and it re-enters the airstream once the system runs. Repair typically involves agitation tools, HEPA containment, and source removal before any sealing is done. Call (855) 658-5111 for an exact quote. Estimates are free.
Original 1960s ducts in Sherman Oaks need repair, not cleaning, when you notice weak airflow at specific registers, temperature swings between rooms, or visible rust and separated seams on the duct runs. A camera inspection confirms what’s happening inside the trunk and at the joints. If a run is disconnected or crushed, cleaning alone won’t fix the airflow. Call (855) 658-5111 to schedule an inspection. Estimates are free.
Yes. Sealing helps because it closes the leaks that let outside air and attic dust pull into the supply stream in the first place. In Sherman Oaks, the basin’s fine windblown dust enters mostly through return-side leaks and unsealed joints. Sealing the system after a thorough cleaning reduces how much of that dust returns. Call (855) 658-5111 for an exact quote. Estimates are free.
A crushed flex duct repair in Sherman Oaks starts with camera inspection to find the exact breach, then source removal of any dust or debris around the damaged section. The collapsed or disconnected run is replaced or reconnected, properly supported, and sealed at the joint with mastic or metal tape. Then we verify airflow at the register before closing out. Call (855) 658-5111 to book a free estimate.
Duct insulation matters because older Sherman Oaks homes often have attic runs with compressed, torn, or missing insulation, which means the conditioned air arrives hot before it reaches your rooms. Replacing compromised insulation is typically part of a repair when the duct itself is being fixed, and it should follow sealing rather than replace it. Call (855) 658-5111 for a free estimate on the combined scope.
Book Duct Repair & Sealing in Sherman Oaks
If your ducts are leaking, crushed, or lined with fused ash, the fix is a repair job, not another cleaning. We handle the diagnosis, the sealing, the insulation, and the verification, with before-and-after photos of the ductwork we touched. The local pro we connect you with is licensed and insured as their state requires, and every job starts with a free written estimate. Call (855) 658-5111. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Studio City.