Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for Studio City Homeowners
If your rooms heat and cool unevenly, if dust settles on the furniture hours after you wipe it down, or if you catch a musty smell when the system first kicks on, the ductwork itself may be the problem. Loose joints, torn flex runs and crushed sections leak conditioned air into attics and crawlspaces long before the hardware fails. Our technicians have up to 10 years of experience tracing exactly where a system loses pressure, and we repair and seal ductwork as a standalone job, so you’re not paying for a cleaning that leaves the real leak untouched. Same-day appointments are often possible in Studio City. Call (855) 658-5111. We answer 24/7.
This is mechanical work, not guesswork. We use Rotobrush and Nikro equipment to inspect and clean the pathway, then close the gaps. The estimate is free, the price is set per job in writing before anything starts, and you get before-and-after photos of your own ductwork so you can see what changed.
What Our Duct Repair & Sealing Service Includes
Every job below starts with a pressure and visual check of the full air pathway, including the return side, the supply runs and the connections at the air handler. We handle each of these sub-services on its own or as part of a larger repair.
Duct Sealing
Duct sealing closes the gaps at seams, joints and boot connections so the air you paid to cool or heat actually reaches the rooms it’s meant for. You need it when some rooms never feel right, when the system runs long, or when a pressure test shows leakage. We seal the joints we can reach and verify the improvement before we call the job finished.

Flex Duct Repair
Flexible duct is common in Studio City attics and crawlspaces, and it’s easy to damage: kinked at a bend, torn by a rodent, or crushed under stored boxes. A collapsed run cuts airflow to the room at the end of it. We replace damaged sections, re-support the runs at proper spacing and re-stretch them so the inner liner stays open.

Metal Duct Repair
Sheet metal ductwork lasts, but the joints separate over time and the seams can open after years of expansion and contraction. You’ll notice rattling, whistle or a room that never gets enough air. We repair the section, re-secure the joints and seal the seams so the duct holds pressure again.

Duct Insulation
Uninsulated or damaged duct insulation lets the air lose its temperature before it reaches the register, which is why some rooms feel lukewarm no matter what the thermostat says. This matters in a hot valley climate where attic runs get baked all afternoon. We replace failing insulation and wrap the repaired sections so the supply air arrives at the temperature it left the unit.
Mastic Sealant
Mastic is the brushable sealant professionals use on duct joints, and it holds far better than tape alone in a hot attic. You need it wherever joints, boots and plenum connections leak. We apply mastic to the seams and connections we can reach, then check the work.
Air Leak Repair
Air leak repair is the broader job of tracking down where the system loses pressure, whether that’s a disconnected boot behind a register, a gap at the plenum or a joint that never sealed properly. We pressure-test to find the leaks rather than guessing. Then we repair and seal each one and confirm the airflow improved.
Because we also handle air duct cleaning Studio City and sanitizing, we can clean the pathway, seal it and treat it in the same visit instead of sending you to a second contractor.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Duct Repair & Sealing
We work with Rotobrush and Nikro contact-cleaning systems on the inspection and cleaning side, which lets us see the condition of the duct interior before we seal anything. Knowing how a system is built and where it wears out makes a real difference when the repair is at a boot, a plenum or a run buried in the attic.
For the air quality side of the job we install and service Honeywell and Aprilaire equipment, including filtration and humidity control, and we apply Guardsman products when a duct needs sanitizing after a repair. Whether you have Honeywell, Aprilaire or any other make, we can help.
Signs You Need Duct Repair & Sealing Right Now
- Uneven room temperatures. One bedroom stays cold in summer while the rest of the house is fine. That’s usually a leak or a crushed run, not a failing air conditioner, and it gets worse the longer the gap stays open.
- Dust that returns fast. Dust settling on surfaces soon after cleaning often means the return side is pulling air from an attic or crawlspace through a gap. Sealing the leak stops the source.
- A musty smell when the system starts. Odor on startup points to moisture or debris getting into the duct through a break. It’s worth checking before it spreads.
- Higher energy bills with no change in use. A leaking system runs longer to reach the thermostat setting, and that cost shows up on every bill. Sealing is one of the few fixes that pays back in comfort and efficiency.
- Visible damage or disconnected joints. If you’ve seen torn flex, tape peeling off a joint or a duct lying loose in the attic, the repair is overdue. Loose ductwork also pulls in air you don’t want in the house.
Our Duct Repair & Sealing Process, Step by Step
- 1
Inspection and pressure check. We start by looking at the accessible ductwork and testing the system’s static pressure. That tells us whether the problem is a single leak, a crushed run or a broader distribution issue.
- 2
Mechanical cleaning first. Before sealing, we clean the pathway with Rotobrush and Nikro equipment. Sealant over a dusty joint doesn’t hold, so this step matters.
- 3
Repair and seal. We replace damaged sections, re-support runs, and apply mastic and proper sealing to the joints and connections. Leaks get closed with materials made for ductwork, not tape alone.
- 4
Insulation and treatment. Where insulation has failed, we replace and wrap it. If the duct showed signs of microbial growth or odor, we treat it with Guardsman products after the repair.
- 5
Verification and photos. We recheck the system and go over before-and-after photos with you. You see the repaired joints and the airflow improvement before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Studio City?
Duct repair and sealing in Studio City typically runs $350 to $1,200 depending on how many leaks we find and how accessible the ductwork is. Sealing a handful of accessible joints usually sits at the lower end, while replacing torn flex runs or repairing multiple metal sections in a tight attic pushes toward the top.
| Service | Typical Estimated Range |
|---|---|
| Mastic sealing of accessible joints | $350 – $600 |
| Flex duct repair or section replacement | $400 – $900 |
| Metal duct repair and resealing | $500 – $1,100 |
| Duct insulation replacement (partial) | $450 – $1,000 |
| Full air leak repair with pressure testing | $600 – $1,200 |
What affects the price: how many leaks there are, how much of the duct is reachable without cutting into walls or ceilings, whether insulation needs replacing, and whether the job calls for sanitizing afterward. You avoid overpaying by getting the written estimate and a before-and-after record of what was done. Our estimate is free and includes an inspection of the accessible ductwork, a clear explanation of what needs repair, the price per job, and no per-vent pricing. The written estimate sets the final price.
Duct Repair & Sealing Near Studio City, Our Service Area
We work across the east Valley and the neighborhoods around it, including Atwater Village, Glassell Park, Mount Washington, Tujunga, Sunland and Koreatown, plus West Hollywood and Mid-City to the south. If you’ve been comparing duct repair & sealing options on the west side or need duct repair & sealing closer to the city center, we can help there too. Estimates are free and scheduling is straightforward. Call (855) 658-5111. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Studio City, CA – Our Local Coverage Area
We serve Studio City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions, Duct Repair & Sealing in Studio City
Duct repair and sealing is the work of fixing damaged ductwork and closing the leaks at joints, seams and connections so the system stops losing air. It’s different from cleaning, which removes debris but leaves a torn or disconnected run exactly where it was. The job covers flex duct repair, metal duct repair, insulation, mastic sealant and air leak repair, done in one visit where possible.
Most residential duct repair and sealing jobs take two to five hours, depending on the number of leaks and how accessible the ductwork is. A straightforward set of accessible joints moves quickly; torn runs in a tight attic or repairs behind finished walls take longer. We give you a time estimate with the written quote so you know what to expect.
Typical estimates in Studio City run $350 to $1,200, with the written estimate setting the final price. Sealing accessible joints usually lands at the lower end, while full leak repair with pressure testing and multiple replacement runs is higher. Call (855) 658-5111 for an exact quote, because estimates are free.
Yes. We install and service Honeywell and Aprilaire air quality equipment, including filtration and humidity control, and we work on the ductwork connected to those systems. Whether the issue is a leaking joint or an air quality add-on that needs attention, we handle both sides.
Same-day appointments are often possible in Studio City, depending on the day and the scope of the work. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, and the estimate stays free.
Yes, our work carries a satisfaction guarantee, and we stand behind the repairs we make. We go over what was done with before-and-after photos so you can see the result. If something isn’t right after the visit, call us and we’ll sort it out.
Clear access to the attic hatch, the air handler and any registers near the work area, and move fragile items away from those spots. You don’t need to do anything else. We handle the inspection, the cleaning and the repair, and we’ll walk you through what we found before we start.
Schedule Your Duct Repair & Sealing Service in Studio City Today
Leaking ductwork costs you comfort every month and gets worse over time. We find the leaks, repair and seal them, and show you the before-and-after photos before we leave. Our technicians have up to 10 years of experience handling the full air system, from cleaning to sealing to sanitizing. Call (855) 658-5111 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Studio City.