Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Studio City Homeowners Choose Lennox Air Duct Cleaning
We provide independent Lennox air duct cleaning, coil cleaning, and duct sealing in Studio City. What sets our Lennox work apart is that we treat the equipment and the ductwork as one system: we clean the blower and evaporator coil that Lennox installs are built around, then seal the return chases and trunk seams that quietly undo a clean system within a season. We are an independent service provider, not affiliated with or authorized by Lennox, and we work on Merit, Elite, and Signature Collection equipment regularly enough to know how each one moves air.
Studio City homes sit in a wind corridor that pushes fine dust through the Cahuenga Pass and along the 101, and that dust settles into return plenums with a gray-black film that ordinary cleaning misses. Call (855) 658-5111 for a free estimate. We answer 24/7.
Why Trust Air Duct Cleaning Studio City for Your Lennox Air Duct Cleaning?
Our technicians have up to 10 years of experience, and much of that time is spent inside Lennox cabinets: the compact blower deck on Merit and Elite furnaces, the cased plenums on Elite and Signature outdoor units, the slab and A-frame coils that feed a supply trunk. We know where the dust hides on these systems because we’ve pulled enough blower assemblies and cleaned enough coils to recognize the pattern before we open a panel.
We repair, install, and service Lennox equipment with quality parts that fit it. Where fit is critical – coil assemblies, gaskets, blower components – we source OEM-compatible parts so the equipment stays within its engineered tolerances. For duct-side work, where the specification is straightforward, we use quality flex duct, mastic, and filter media. Nothing about that approach asks you to compromise the manufacturer’s design intent.
Warranty-safe service is part of the same discipline. That means we don’t cut, drill, or seal anything in a way that compromises the cabinet, the coil casing, or airflow specification. If a repair would put your Lennox warranty at risk, we tell you before we touch the equipment. The local pro is licensed and insured as their state requires, and the price is set per job by the written estimate before work starts.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Fix in Studio City
Lennox equipment has real strengths, and it has a handful of predictable duct-side failure modes. These are the ones we see most in Studio City:
- Matted blower wheels on Merit and Elite furnaces. The compact blower deck with a slide-out blower is easy to service, but it collects dust on the wheel and housing until static pressure climbs and room airflow goes uneven. You feel it as weak registers on the far side of the house and a system that runs longer than it should.
- Fouled evaporator coils on Elite and Signature outdoor units. The coils are tightly finned and sit inside a cased plenum that traps lint and debris. When the coil fouls, the system behaves like it’s low on refrigerant – but the charge may be fine and the coil is simply buried. Cleaning the coil restores the temperature split without a recharge.
- Cracked or sludge-filled condensate pans. Lennox slab and A-frame coils often develop condensate pan cracks or drain pan sludge that feed moisture straight into the supply trunk. In flex duct runs, that moisture encourages microbial growth that no surface wipe will fix.
- Panned-joist returns with unsealed seams. Return duct chases on many Lennox installations use panned joist returns that aren’t sealed at the seams. They pull attic or garage air into the system, which defeats the filter and drags wind-blown dust into the return plenum instead of keeping it out.
- Undersized returns in older Studio City homes. In 1930s to 1950s ranch and Spanish-style houses South of the Boulevard, the original return sizing was never meant for modern Lennox equipment. Cleaning alone won’t fix airflow there – the return often needs sealing and resizing to match the system.
A typical Lennox Elite furnace paired with a cased A-frame coil often shows up with weak upstairs airflow and a blower wheel matted with dust. The usual cause is a panned-joist return leaking attic air combined with a fouled evaporator coil. A qualified tech pulls the blower for off-unit cleaning, cleans the coil in place with a foaming no-rinse product, then seals the return panning and trunk seams with mastic before verifying static pressure and temperature split.
Lennox Parts & Our Repair-vs-Replace Approach
We source OEM Lennox-compatible coils, gaskets, and blower components when the fit is critical, and quality aftermarket flex duct, mastic, and filter media for duct-side work where the specification is straightforward. We don’t claim to stock genuine Lennox parts; we source what fits your equipment correctly.
The repair-or-replace decision comes down to condition, not age alone. If a Lennox coil or blower is fouled but structurally sound, cleaning and sealing is the honest call. Replacement only makes sense when corrosion, cracks, or failed welds mean cleaning won’t hold. We’ll show you what we found before recommending either path.
If your Lennox system’s airflow has been off for a while, call (855) 658-5111. Estimates are free and we’ll tell you plainly whether repair or cleaning is the right answer.
Our Lennox Service Process – Step by Step
- 1
Diagnosis. We measure static pressure, temperature split, and airflow at the registers before opening a panel. That tells us whether the problem lives in the blower, the coil, the return chase, or the duct run itself.
- 2
Repair or install. We pull the blower for off-unit cleaning, clean the coil in place with a foaming no-rinse product, seal return panning and trunk seams with mastic, and replace gaskets where the seal has failed. If a component needs replacement, we fit an OEM-compatible part.
- 3
Test. We re-measure static pressure and temperature split against the baseline to confirm the fix actually moved air the way it should. Numbers, not impressions.
- 4
Warranty review. We document what was done and confirm the work is consistent with your Lennox warranty requirements, so you have a record if anything comes up later.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in Studio City
We service and work around the full range of Lennox residential equipment found in Studio City homes: Merit Series furnaces and air conditioners, Elite Series furnaces and outdoor units, Dave Lennox Signature Collection variable-speed furnaces and high-efficiency air conditioners, and the Lennox Healthy Climate indoor air quality line, including PureAir and HC16 media filter cabinets.
Our work on these systems covers what surrounds them – evaporator coil cleaning, return duct cleaning, and duct sealing – plus installation of Honeywell and Aprilaire air quality systems when a homeowner wants to improve filtration after the ducts are clean. Clean it, seal it, treat it. The equipment stays the center of the system, and we make sure everything feeding it does its job.
We Also Service These Brands
Lennox is one focus, not the whole practice. We also clean and service duct systems and HVAC equipment on Trane and Carrier installations across Studio City, with the same Rotobrush and Nikro mechanical cleaning equipment and the same coil and return-chase approach. If your home has a mix of brands, one visit can cover all of them.
FAQs – Lennox Air Duct Cleaning Service in Studio City
No. We are an independent service provider and are not affiliated with or authorized by Lennox. We repair, install, and service Lennox equipment with quality parts that fit it, and our independence means we diagnose the whole system honestly rather than only the parts a manufacturer program rewards. Call (855) 658-5111 for a free estimate.
Yes. For fit-critical components – coils, gaskets, blower components – we source OEM Lennox-compatible parts, and for duct-side work we use quality flex duct, mastic, and filter media. We don’t stock genuine Lennox parts, but we source what fits your equipment correctly. Call (855) 658-5111 to talk through your system.
Most Lennox duct cleaning, coil cleaning, and sealing jobs take a few hours to a full day depending on system size, how fouled the coil and blower are, and how much sealing the return chases need. We give you a time range with the written estimate so you can plan around it. Estimates are free – call (855) 658-5111.
We cover Lennox Merit Series, Elite Series, Dave Lennox Signature Collection equipment, and the Lennox Healthy Climate indoor air quality line including PureAir and HC16 media filters. The work is coil cleaning, return duct cleaning, duct sealing, and the duct-side support these systems depend on. Call (855) 658-5111 for a free estimate.
Done correctly, no. We avoid cuts, holes, or seals that compromise the cabinet, coil casing, or airflow specification, and we document what was done so you have a record if a warranty question ever comes up. If a repair would put your warranty at risk, we tell you before we start. Call (855) 658-5111 to talk through your system.
Pricing is per job by written estimate, not per vent, and it depends on system size, how many returns and trunk runs are involved, and whether coil cleaning and sealing are part of the visit. We agree one flat price before work starts, and you get before-and-after photos of your own ducts. Call (855) 658-5111 for an exact quote – estimates are free.
Usually yes. On Merit furnaces, weak airflow after a fresh filter typically traces to one of three things: a matted blower wheel, a fouled evaporator coil, or a panned-joist return leaking attic air into the chase. Static pressure testing tells us which one it is before we open anything. Call (855) 658-5111 for a free estimate.
No. The filter cabinet stays in place during duct cleaning. We clean around the cabinet, inspect the filter media and the seal at the cabinet connection, and only touch the cabinet itself if the gasket or seal has failed. Call (855) 658-5111 to talk through your setup.
Because the dirt is on the inside. Elite outdoor unit coils sit in a cased plenum that traps lint and debris behind the visible fins. That hidden fouling mimics a refrigerant charge problem – the system runs warm but the charge is fine. In-place cleaning with a foaming no-rinse product restores the temperature split. Call (855) 658-5111 for a free estimate.
No, and we won’t seal a Signature SLP98V system without one. Variable-speed furnaces are sensitive to static pressure, and sealing a leaky return without measuring how much the system already depends on that leakage can send static pressure the wrong way. We measure before and after every sealing job. Call (855) 658-5111 to book a pressure test with your estimate.
Yes, flex duct is common on Lennox installs here, especially on 1960s-70s tract homes and hillside builds, and it does need a different approach. Flex duct has a ribbed interior that traps dust in the corrugations, and the liner can be damaged by aggressive tooling, so we use contact cleaning equipment sized for the material and inspect for liner tears and sagging runs while we’re in there. Call (855) 658-5111 for a free estimate.
Book Your Lennox Service in Studio City, CA
Lennox equipment deserves service that respects how it was built. We clean the coil and blower, seal the return chases and trunk seams, and verify the fix with static pressure and temperature split – then hand you before-and-after photos of your own ducts. One flat price per system, agreed before work starts. Call (855) 658-5111 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Studio City.