Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Mount Washington, CA
We provide independent Lennox service across Mount Washington, from hillside homes on narrow canyon streets to mid-century builds tucked into side yards. What makes our Lennox work here different is access and smoke: we plan for exterior stairs, tight attic panels and post-Santa Ana ash before we ever connect a hose. Call (855) 658-5111 for a free estimate.
We’re an independent shop, not a Lennox dealer or authorized agent, and that freedom matters. We diagnose the ducting and coils that are actually in your house instead of following a dealer program’s checklist. Our technicians have up to 10 years of experience, and we bring Rotobrush and Nikro mechanical cleaning equipment rather than a wand-and-blow setup. The job is one flat price per system, agreed before anyone starts, and you get before-and-after photos of your own ducts. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Why Mount Washington Residents Choose Us for Lennox Service
Lennox equipment is familiar ground for us. We work on Lennox systems regularly, and the parts we install are chosen to fit what’s in your attic or under-deck space, not whatever happens to be on a shelf. When a Lennox Elite air handler sits behind a low-clearance access panel on a slope, the fitting matters as much as the part.
Mount Washington scheduling is its own skill. Crews here plan for exterior stairs, side-yard gates and hillside decks, so the time estimate you get on the phone reflects the actual house and not a flat-rate guess. The price is one flat rate per system, set by the written estimate before work starts. The local pro who performs the work is licensed and insured as their state requires, and we can work with your insurer on claims that qualify.
We also handle the full air pathway: Mount Washington homes get supply and return duct cleaning, dryer vent cleaning, HVAC cleaning, duct repair and sealing, and air quality and sanitizing as one scope, so nobody has to coordinate three contractors for one house.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Mount Washington
- Sagging flex runs at the air handler. Flex duct added piecemeal to a Lennox air handler in a hillside attic tends to sag and separate at the takeoffs. During a Santa Ana event, that gap pulls ash-laden attic air straight into the airstream instead of through the filter.
- Ash-caked evaporator coils. Lennox evaporator coils in older systems collect fine brush-fire ash that bakes onto the fins. The symptom looks like a failing blower, but the coil is just choked and needs a proper cleaning.
- Leaking return plenums. Return plenums on Lennox downflow and horizontal attic units leak at the seams after years of heat cycling. Once the seams open, smoke and dust get drawn directly into the return, bypassing filtration entirely.
- Loose flex connectors at the cabinet. Older Lennox flex connectors vibrate loose over time. On canyon homes with long, tight duct runs, that pressure loss creates hot spots that stress the heat exchanger.
- Return grilles pulling ash indoors. After a wind event, hilltop and canyon-edge returns draw fine ash into the system. Return duct cleaning plus sealing is what stops the next event from repeating the problem.
Lennox Service in Mount Washington: What Local Conditions Mean for Your Equipment
Mount Washington’s 1920s to 1960s hillside homes often had Lennox systems retrofitted into attics and under-deck spaces with short, irregular duct runs that mix rigid metal and older flex. Cleaning here regularly means crawling through tight, low-clearance access panels rather than working in the open attics you’d find in nearby valley neighborhoods.
A typical Mount Washington call looks like this: a Lennox Elite furnace in a hillside home where the return grilles are pulling in fine ash after a Santa Ana wind event. The technician finds the return plenum leaking at the seams and the evaporator coil coated with ash, seals the plenum with mastic, cleans the coil, and repairs the sagging flex runs in the tight attic. Access often means hauling portable equipment up exterior stairs and through side-yard gates. The work is as much about sealing against the next smoke intrusion as it is about cleaning what’s already inside.
That’s the read on your equipment that a generic page won’t give you: on Mount Washington streets, the duct problem and the access problem are the same problem.
Lennox Models & Products We Service in Mount Washington
We service the range of Lennox equipment found in Mount Washington homes: Elite Series furnaces and air handlers, Merit Series gas furnaces, Dave Lennox Signature Collection variable-capacity systems, and XC Series heat pumps. Alongside the equipment, we clean, repair and seal the ducting connected to it, including flex runs, return ducts and plenum seams.
Parts selection is deliberate. For critical components like heat exchangers and control boards, we use OEM Lennox parts. For hillside retrofits, quality aftermarket flex duct, mastic and foil tape frequently hold up better than the originals did. If a heat exchanger is cracked, replacement is the only honest answer; in most other cases, repair and sealing are viable and we’ll tell you which one you’re looking at.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Mount Washington
Pricing here runs on whole-system ranges, set per job by a written estimate after we see the access and duct layout. That’s the honest way to quote a hillside house with tight panels and mixed duct types.
- Air duct cleaning, whole system: $450 – $1,200
- Dryer vent cleaning: $150 – $350
- HVAC cleaning, including coil and blower: $350 – $900
- Duct repair and sealing: $400 – $1,500
- Air quality and sanitizing treatment: $250 – $700
What drives cost is access first, then duct layout, then how much damage we find inside. A free estimate includes an inspection of the accessible ducting and a written price before any work begins. Call (855) 658-5111 for an exact quote on your Mount Washington home.
Serving Mount Washington, CA – Our Local Coverage Area
We serve Mount Washington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Mount Washington
Yes. Tight attic access is the normal condition here, not an exception. We use portable Rotobrush and Nikro equipment that can be carried through side-yard gates and up exterior stairs, then worked through the access panel you have. Call (855) 658-5111 and we’ll talk through your access before scheduling.
Smoke smell that lingers usually means the return plenum is leaking at the seams or the evaporator coil has ash baked onto the fins. The residue stays put until it’s mechanically cleaned and the seams are sealed with mastic. That’s the “clean it, seal it, treat it” sequence we run on Lennox systems in Mount Washington.
They do. A filter that works fine in a sealed valley house can clog fast when canyon-edge returns are pulling ash, so check it after every wind event. Sanitizing treatment with Abatement Technologies and Guardsman products helps with odor and microbial concerns after mechanical cleaning, and a Honeywell or Aprilaire filtration upgrade is worth discussing if smoke season keeps repeating.
The most common cause is an ash-coated evaporator coil or a flex run that separated at a takeoff. Both restrict airflow and both mimic a blower problem. We diagnose which one it is before quoting repair, which is the advantage of an independent shop.
If the heat exchanger is cracked, replacement is the only honest call. A crack in that component is a safety issue, not a cleaning issue, and no sealant fixes it. Otherwise, repair and sealing are usually viable, and our estimate states which one applies to your system.
Service Areas Near Mount Washington
Our Lennox work reaches the neighborhoods around Mount Washington, including Glassell Park, Atwater Village, Studio City, Sunland and Mid-City. Each has its own housing stock and access quirks, and we plan each estimate around the house rather than a template.
Book Your Lennox Service in Mount Washington Today
Whether it’s a smoking return after a wind event or a duct system that hasn’t been touched in years, we’ll inspect it, explain what we find, and give you one flat price per system before work begins. Call (855) 658-5111 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Studio City.